This is a pre-inspection agreement between you (the Client) and the Company named below for an
inspection and report (Services) at the Property listed below. This agreement is designed to ensure you
understand the scope, extent of reporting and limitations of the Service.
PLEASE BE AWARE THAT BY ITS NATURE THIS SERVICE HAS LIMITATIONS AND EXCLUSIONS YOU SHOULD BE
AWARE OF. PLEASE REVIEW THIS AGREEMENT AND CONTACT YOUR CONSULTANT WITH ANY QUERIES.
You need to sign and return this agreement to your consultant, before your inspection takes place.
Your Service
The Service you are purchasing is: Building or Prepurchase Building and Timber Pest Inspection
The purpose of the Service is to provide advice regarding the condition of the Property at the time of the inspection
having regard to the significant items noted below.
Property address as listed on report.
The Company: Jim’s Building Inspections (Cronulla)
ABN: 60 148 944 784
Your Contact: Andrew Theodosi
0412 615 890
cronulla@jimsbuildinginspections.com.au
We’ll report on the condition of the property at the time of inspection, as required by Australian Standard
AS4349.1-2007 Part 1 Pre-purchase inspections – residential buildings, including:
• Urgent and serious safety hazards, which are building elements or situations that represents a
current or immediate potential threat of injury or disease to persons.
• Major Defects, which are defects of sufficient magnitude where rectification has to be carried out in
order to avoid unsafe conditions, loss of utility or further deterioration of the property.
• A general impression regarding the extent of Minor Defects (for example, significantly deteriorating
exterior paint).
It is outside the scope of this inspection and we are not able to provide an opinion on:
• Waterproofing in wet areas
• Areas above safe working height as deemed by us
• Site Drainage
• Compliance with Building code elements
We’ll report on the condition of the property at the time of inspection, as required by Australian Standard
AS4349.3-2010 Inspection of buildings Part 3: Timber pest inspections, including:
• Visually identifiable evidence of timber pests, irrespective of whether past or current;
• Visually identifiable evidence of damage caused by timber pests and resultant hazards, where
applicable;
• Conditions conducive to timber pests;
• An opinion regarding the susceptibility of the property to timber pests;
• Recommendations for further investigations and actions you can take to inform yourself of the risk
of timber pest attack and damage at the property
Key terms in italics are based on Australian Standard definitions and are explained on our website here:
https://www.jimsbuildinginspections.com.au/glossary.
All inspections are conducted in accordance with Australian Standard 4349 (and AS4349.1 where it is a pre-
purchase inspection) and 4349.3-2010, and you acknowledge that the extent of our reporting is based on
conditions of the Property at the time of the inspection and subject to the scope, accessibility and other
limitations set out below. The exception to this is AS4349.2 Group Titled Properties and is listed in our exclusions
below.
Scope
Unless specified otherwise as part of the Service we use visual inspection methods, the application of
sounding and moisture identification devices and assessment of serviceability to form an opinion regarding
the Property at the time of inspection and deliver you a Report based on the significant items noted above.
We will generally report by exception and not report on deterioration caused by fair wear and tear.
The Property will be compared to others of a similar age, construction type and method that had an
acceptable level of basic maintenance completed. It follows that the Property may not comply with current
Australian Standards, Building Regulations or other legislative requirements.
An estimate of costs to treat termite activity or install and or apply a termite barrier or management system
will not be included in the Report. If you would like this information we can refer you to suitably qualified
pest controllers to provide this information.
We don’t advise you about title, ownership or other legal matters like easements, restrictions, covenants
and planning laws. None of our inspections constitute an approval by a Building Surveyor, a certificate of
occupancy or compliance with any law, regulation or standard.
Our Report may recommend a further inspection by another specialist such as an engineer, surveyor or other
trade if we find specific problems not included in the Service. We may also recommend specific rectification
or maintenance works be performed. We recommend you act on this advice.
Invasive Inspections
If this is an Invasive Inspection Service, we will perform the inspection in a manner which minimises damage
where possible, however the Client acknowledges that works involved in an invasive inspection includes
taking samples and may cause degradation or damage to materials and Property elements, that the Service
does not include any rectification or reinstatement works and the Client agrees to indemnify us against any
costs incurred as a result of the inspection.
In addition, the Client must gain all necessary permissions for the invasive inspection to take place and
ensure any rectification or reinstatement works are carried out by a professional tradesperson.
Areas for Inspection
Subject to below, we will inspect:
• Interior
• Roof void or ceiling cavity
• Exterior
• Subfloor (if applicable)
• Adjoining structures or other outbuildings within 30m of the main building eg: garages, sheds,
retaining walls, fences etc.
• The site to the fence line / property boundary or up to 30m from the house including major trees
We only inspect and report on accessible areas. You will need to ensure we have access to all areas at the
Property being inspected. If you are not the owner, you should discuss this with the Real Estate Agent or
owner.
We will consider the following areas inaccessible:
• Elevated areas like roofs that are not safely accessible from a 3.6m ladder, using an unobstructed line
of sight where building elements are close enough to allow inspection
• Access points (like manholes) smaller than 400mm x 500mm
• Crawl space (like under floors etc) with a clearance of less than 600mm x 600mm
• where reasonable entry is denied to us, or where we cannot access, are excluded from the inspection.
We will identify in our Report any additional areas that are inaccessible, and you may choose to have a
further invasive Inspection Service undertaken.
We may need to turn off the mains power for a short time to safely inspect the roof space (and must do so
if you are in Western Australia). We will require you to separately consent to this, and where permission
is not granted we will be unable to access the roof void and this will form a limitation for us. If you have
any concerns over this, please discuss this with your consultant.
Limitations
In addition to inaccessible areas, inspections are commonly and frequently limited by a number of factors;
you should expect this to happen during your inspection.
You must inform us of any known or potential limitations that may impede our ability to perform the
Inspection or produce the Report.
Examples of common limitations are listed below:
• Conditions we reasonably consider unsafe to inspect
• Locked doors or inaccessible rooms
• Security systems
• Pets
• Furniture, floor coverings, wall and ceiling linings and stored items
• Restriction of access due to height – we only inspect first storey roof structures unless prior
arrangement is made
• Restriction of access due to lack of clearance, small crawl spaces, lack of entry access points or thick
vegetation
• Adverse weather conditions
• If the Property has been vacant for a period of time, moisture levels or leaks may not be detectable
at the time of the inspection because often only frequent use of water pipes (showers, taps etc) result
in a leak being identifiable. We advise further testing on pipes and water susceptible areas (such as
the bathroom and laundry) after more frequent use has occurred.
You acknowledge that the limitations described above, are not intended to be an exhaustive list and we
will endeavour to identify any limitations or restrictions specific to the Property as soon as possible. You
may then choose to have a further invasive inspection service conducted.
Exclusions
Unless explicitly selected as an option with your Service, the Inspection and Report exclude assessment or
reporting of: deterioration caused by fair wear and tear, footings below ground, concealed damp proof
course electrical installations, concealed plumbing, adequacy of roof drainage, gas fittings and fixtures, air-
conditioning, automatic garage doors, pools and related equipment, alarm systems, operation of fireplaces
and chimneys, flues and solid fuel heaters, alarm and intercom systems, soft floor coverings, appliances,
paint coatings, health hazards, timber and metal framing size and adequacy, concealed tie downs and
bracing, other mechanical or electrical equipment such as gates or inclinators, soil conditions, control joints,
sustainable development provisions, concealed timber frames, landscaping, rubbish, floor coverings,
furniture and accessories, stored items, insulation, environmental matters (water tanks etc) or lighting and
energy efficiency.
We won’t inspect common property unless specifically requested. If this request is made, our inspection
does NOT conform to AS4349.2 Group Titled Properties. If this reporting is required, the client must seek a
separate inspection for Group Titled Properties. We are unable to advise about combustible cladding.
We are unable to advise on Magnesite, cracks or evidence of crack repairs to masonry construction, concrete
slabs or load bearing walls. We are unable to advise on structural stability of any external timber structures.
On these issues we will recommend a structural engineer.
Our reporting is not suitable for Tribunal or Court Proceedings, where evidence is required by the franchisee
as an expert witness, and where specific report formatting must be applied. An Expert Witness Testimony is
required for this purpose.
An estimate of costs to fix defects is not included unless this Service is a Remediation or Renovation
Report. Any estimate prepared as part of a Remediation and Renovation Report is based on industry
standard cost guides and the consultant’s own experience and should not be relied on for anything other
than a professional opinion. You acknowledge that costs to repair defects are very difficult to estimate
because the extent of work required is unknown until it begins and there is often reduced competition as
many contractors are unwilling to take on rectification work.
We also provide a Quotation and Project Management service where we can:
• Prepare scope of works documents for contractors to price
• Coordinate all required trades to provide you with secure fixed price quotations
Liability and acknowledgement
The client acknowledges that
• Removal of access, vent or other covers during the course of the Services will be done in a tradesman like
manner, however we do not accept liability for damage or reinstatement, replacement or repair which may
arise during this process;
• The Report does not constitute a warranty or an insurance policy against problems developing with the
building in the future. Accordingly, a preventative maintenance program should be implemented for the
property which includes systematic inspections, detection and prevention of incipient failure;
We accept liability for any implied contractual terms that cannot be excluded or limited under applicable law, including
the ACL and any loss that is reasonably foreseeable from our material breach of these Terms, however provided you
obtain the benefit of any warranty or other obligation conferred upon you pursuant to the ACL, we limit our liability
to the replacement of the Services the provision of equivalent Services or the cost of providing those Services.
Other than as specifically accepted by us above, we are not liable for any other losses or damages you may suffer,
including any loss caused by you or to the extent it results from your failure to take reasonable steps to avoid or
minimise that loss, loss caused by event falling outside our reasonable control and any indirect or consequential losses.
You indemnify, and keep indemnified, us and our franchisors, employees and agents from and against any loss
(including reasonable legal costs and expenses) or liability incurred or suffered by us arising from any claim arising out
of your failure to advise on safety issues at the Property, your negligence or breach of these terms and conditions.
Privacy Policy
We value your personal information, we will ensure it is secure and never share or sell your personal details and
contact information with people not associated with Jim’s Building Inspections, unless instructed to do so by you.
We do however use data collected during inspections for research, commercial, training and educational purposes.
For more information please review our Privacy Policy online.
Cancellation Policy
We understand that sometimes things happen, and you need to cancel or defer your booking. However, as
we begin to incur costs and spend time on your booking before the actual inspection, administration fees
apply to cancellations and deferred bookings.
• If you need to cancel or defer your booking and let us know at least 48hrs prior to your scheduled
booking a 10% administration fee will be charged.
• If you cancel on the day of the inspection, a 40% administration fee will be charged.
• If you cancel the inspection, once the inspection has commenced, you are liable to pay the full fee.
COMPLIMENTS AND COMPLAINTS
Your feedback, both positive and negative, can assist us to improve our services. We encourage you to please
contact us with any compliments or concerns directly and as soon as you are able.
The process for managing customer feedback is documented below:
• Contact your consultant directly to provide feedback or make any complaint as soon as you are able.
• If your consultant cannot resolve it or it involves our insurers they will escalate it to their Regional
Franchisor (Manager) and / or insurer as applicable.
• You can also contact their Regional Franchisor (Manager) directly on 131 546 ask to speak to your
Consultants Regional Franchisor (Manager) or email info@jimsbuildinginspections.com.au
General
You acknowledge and agree we own the copyright in the Report and may make the Report available to third
parties.
This agreement and the Services will be governed by the laws in force in the state or territory in which the
Property is located.